flare nut wrench

Model HY58 Labor Saving Wrench adopts high efficiencyplanetary shifting as main drive. It futures small dimension,lightness, durability and large gear ratio and thas a large out puttarque can be priduced by inputing less force. The product is madeof high grade alloy steel in the process of fine heat treatment .The outer surface is polished with the plastic spray treatment andhas a fine feel. The wrench is widely used to assemble anddisassemble the tyres of various heavy trucks. It is a necessityfor repairmen or drivers.
Directions
1.put the sleeve onto the square head of the handle end and therocking bar on the other end
2.When the sleeve is put on the net to be disassembled or fastened,pay attention to the direction of lossening an tightening . Rollthe rocking bar so that the handle is against the side of anotherbolt tightly.
3.After the nut is unscrewed ,use the long bar to disassemblequickly.(First use the long bar to screw on quickly and then uselabour saving wrench instead during tightening.)
Technical parameter
1.Gear ratio 1:55.7
2.Max safe output torque is 3200N.M(equal to 330 KGF.M)
3.Max output torque for normal dissembling(tightening) is1200N.M(equal to 40 Kgfapplied to 3-meter-long bar)and the pullforce of rocking bar is 18kgf.
4.It takes about six minutes to disassemble(tighten) a tyre.
5.The net weight of the tool is 5.8 kg and the total weight is6.5kgs

flarenut wrench

flare nut wrench